|
MaxFil™Pressure Filtration Device 
(Click for larger image)
Manufactured by:
 
The new Teflon*-coated Aluminum design is durable
and lightweight. The MaxFil is specifically designed to meet the
demands of the Toxicity Characteristic Leaching Procedure. Design
features built into this hazardous waste filtration system make
complying with Method 1311 easy and efficient. No splitting of the
sample extract is necessary because the 2200mL capacity allows the
analyst to load the entire sample before filtration begins. This not
only saves time but also reduces the supplies necessary to prepare a
sample.
Pressurization is achieved by use of a quick connect
fitting instead of a cumbersome hose-barb fitting. This
quick-connect requires no clamping and, unlike a barbed fitting, it
cannot "blow off" during filtration. All pressures are
monitored by a pressure gauge located on the top plate of the MaxFil.
When used with a regulator, filtration can be performed accurately
and precisely without constant attention by the analyst.
Sample materials may be introduced into the MaxFil
by removing the top plate or through the 1" diameter entry
port. This unique entry port has a two-inch knurled handle that
enables the analyst to open and close the port without the use of
tools.
All wetted surfaces of the Maxfil are Teflon*-coated
to offer extra assurance that no leaching of metals will occur.
Replacement parts available. One Year Warranty.
MaxFil w/Teflon #PF100-1: $3,570.00
Click here for
parts list.
MaxFil is a trademark of Environmental Express, LLC
Disposable TCLP Filtration Kit
Exclusively from Miller Analytical
(Click for larger image)
This complete TCLP filtration kit is designed for filtering those extractions which do not require acid digestion. You can quickly filter a 1 to 10ml sample into the provided polycarbonate sample tube and place it directly in most AA and ICP autosamplers. This eliminates the slow vacuum or pressure methods and rules out the time consuming apparatus cleanup and large volumes of contaminated wash water. Also, since each kit is used only once, there is virtually no chance of cross contamination.
Each kit consists of 1 disposable syringe, 1 Whatman 13mm GF/F syringe filter and 1 disposable sample tube.
Kits are available unwashed, or washed with 1N Nitric Acid as specified in Method 1311.
#1311-FKS: Case of 50 kits, unwashed.... $154.00
#1311-FKW: Case of 50 kits, washed.... $175.00
|
)
